-
Combined Environmental Test Systems
Combined Environmental Test Systems are for combination tests of Vibration, Temperature and Humidity with Vibration Test Systems and Environmental Chamber thus realizing more realistic environment during products in use or transportation and enhancing the quality of the products. Combined Environmental Test Systems with not only Vertical Single-axis Vibration Test Systems but also Single-axis Vibration Test Systems with Horizontal Tables and Multi-axis Vibration Test Systems are available.
Combined Environmental Test Systems CS Series
Combined Environmental Test Systems with Vibration Test Systems and Environmental Chamber
Combined Environmental Test Systems are for combination tests of Vibration, Temperature and Humidity with Vibration Test Systems and Environmental Chamber thus realizing more realistic environment during products in use or transportation and enhancing the quality of the products. Combined Environmental Test Systems with not only Vertical Single-axis Vibration Test Systems but also Single-axis Vibration Test Systems with Horizontal Tables and Multi-axis Vibration Test Systems are available.
Specifications
| System Model | Internal Dimensions |
|---|---|
| CS-418P-1C | 600×600×600 |
| CS-418P-2C | 800×800×800 |
| CS-418P-3C | 1000×1000×1000 |
| CS-418P-4C | 1200×1200×1200 |
| Temperature Range | -40℃～+180℃ | |||
|---|---|---|---|---|
| Humidity Range | 20%～98%R.H (with Temperature Conditions) | |||
| Temperature & Humidity Fluctuation | Within ±0.5℃ / ±4.0%RH (excluding Heat-up & Cool-down Time) | |||
| Temperature Distribution | Within ±3.0℃ | |||
| Temperature Ramp Time* | 20℃→-40℃:Within 60 min. / 20℃→-40℃:Within 60 min. *with Total Mass of about 40 kg (Specimen & Fixture) |
|||
| Body Material | Exterior : Bowdlerized Steel / Interior : SUS304 2B | |||
| Heat Insulation Material | Glass Wool etc. | |||
| Temperature & Humidity Controller | TFT Display, Touch Panel Operation | |||
| Accessories | Lid Cover for Independent Use, Cable Port 50φ×1, Hour Meter×1, Waterdrop-proof Sheet, Height Adjustors | |||
| Interlock between Chamber and Vibration Test System | Start and Stop with Time Signals from Temperature Controller, Interlocking Abnormal Stop | |||
| Moving Method | Chamber Moving on Rails / Vibration Generator Moving on Rails | |||
| Docking Method with Vibration Generator | Piggy-back Docking / with Coupling Jig | |||
| Protective Devices | Breaker, Fridge Overload Relay, Over Heat Prevention, External Alarm Terminal Fridge High-pressure Switch, Boil Dry Protector, Door Switches, Emergency Stop Switch, Water Rack etc. | |||
| System Model | CS-418P-1C | CS-418P-2C | CS-418P-3C | CS-418P-4C |
|---|---|---|---|---|
| Internal Dimensins | 600×600×600 | 800×800×800 | 1000×1000×1000 | 1200×1200×1200 |
| Humidity Range | -40℃～+180℃ | |||
| Humidity Range | 20%～98%R.H (with Temperature Conditions) | |||
| Temperature & Humidity Fluctuation | Within ±0.5℃ / ±4.0%RH (excluding Heat-up & Cool-down Time) | |||
| Temperature Distribution | Within ±3.0℃ | |||
| Temperature Ramp Time | 20℃→-180℃:Within 90 min / 20℃→-40℃:Within 60 min ※with Total Mass of about 40 kg (Specimen & Fixture) | |||
| Body Material | Exterior : Bonderized Steel / Interior : SUS304 2B | |||
| Heat Insulation Material | Glass Wool etc. | |||
| Temp. & Humidity Controller | TFT Display, Touch Panel Operation | |||
| Fittings Accessories | Lid Cover for Independent Use, Cable Port 50φ×1, Hour Meter×1, Waterdrop-proof Sheet, Height Adjustors | |||
| Chamber-VTS linkage | Start and Stop with Time Signals from Controller, Linked Interlocks | |||
| Moving Method | Chamber Moving on Rails | |||
| Docking with Shaker | Piggy-back Docking | |||
| Protective Devices | Breaker, Fridge Overload Relay, Over Heat Prevention, External Alarm Terminal Fridge High-pressure Switch, Boil Dry Protector, Door Switches, Emergency Stop Switch, Water Lack, etc. | |||